Illustrated Tips | Home

Tip #160
Snug-fitting moldings

Right Click here to download a printer friendly version of Tip-
Pg. 1 (294 KB)
Help with Downloading PDF Files

Fitting moldings tightly into an inside corner can be difficult if splinters, old nails, blobs of glue or other obstructions happen to be present at the joint.

This is especially true with quarter-round and similar moldings that are designed to fit snugly against two mating surfaces.

To avoid these problems, hand plane a small flat onto the back side of your molding. This flat will often provide just the right amount of relief for the molding to slip tightly into position without interference from these small obstructions.

Subscribe | Illustrated Tips | Unsubscribe | Change of Address | Invite A Friend | Downloading Help | Daily Tips Archive | Links

Policies | Contact Us | Corporate Web Site

Copyright © 2017 Shopsmith All rights reserved.