Illustrated Tips | Home

Tip #213
Gripping tiny drill bits

Right Click here to download a printer friendly version of Tip-
Pg. 1 (286 KB)
Help with Downloading PDF Files

Super-small drill bits are often just too small to be gripped in conventional drill chucks without slipping. So, other than running to the store to purchase an expensive zero clearance chuck, what do you do.

If you happen to have some rosin-core solder around the shop, the core may be large enough to accommodate your drill bit.

If so, cut off a piece of your solder about 1" long…shove the bit down into the solder's core and insert the whole thing into your drill's chuck.

When you tighten the chuck down, the solder will compress, gripping your tiny bit solidly…with a rosin coating that won't let it slip.

Subscribe | Illustrated Tips | Unsubscribe | Change of Address | Invite A Friend | Downloading Help | Daily Tips Archive | Links

Policies | Contact Us | Corporate Web Site

© 2007 Shopsmith Inc. All rights reserved.