|
Tip
#80
How to Cut Chamfers
Right
Click here to download a printer friendly version of Tip-
Pg.
1-2 (761 KB)
Help with Downloading
PDF Files
Operations:
1. Set saw table at "0". Prepare a board 3/4" x 8"
x 8".
2.
Lock headstock and carriage at extreme right of tubes. Tilt
saw table to 45-degrees, feeding out on quill while tilting.
3.
Mark off on edge of board the desired width of chamfer. In
this case let it be 1/4".
 |
|
Fig.
2 Click image for larger view.
|
4.
Put miter gauge in right table slot.
 |
|
Fig.
3 Click image for larger view.
|
5.
Adjust so that inside saw blade tooth is even with pencil
mark on edge of stock, with marked edges of stock down.
6.
Make cuts on all four edges.
 |
|
Fig.
4 Click image for larger view.
|
Warning:
Turn off machine and let it come to a complete stop. Do not
return stock after each cut, but remove from miter gauge and
return empty gauge.
 |
|
Fig.
5 Click image for larger view.
|
Back to
Description and Use
|
