Illustrated Tips | Home

Setup & Features
Bandsaw Blades
Basic Bandsawing
Bevel Cuts
Round Stock
Resawing Duplicate Parts
Pad Sawing
Pattern Sawing
Sawing Parallel Convex Curves
Pivot Sawing
Compound Cutting
Cutting Particle Board, Plastics & Metals

Tip #31
Band Sawing Versatility (continued)
Click here for a printer friendly version of Tip-
Pg. 1-3, Pg 4-6, Pg 7-9, Pg 10-12, Pg 13-15, Pg 16-18

Resawing Duplicate Parts

Figure 14-32. To resaw duplicates: (A) Draw the pattern on a thick piece of stock. (B) Cut out the shape and then resaw it to make the duplicates.

Because the bandsaw cuts easily through thick stock, it's possible to preshape a block of wood and then resaw it into separate pieces that will be duplicates of the original design.

The shape of the piece that is needed is drawn on one surface of the thick stock. The shape is then cut out on the bansaw. The shaped piece is then resawn (Figure 14-32). Follow the procedures for "Resawing" earlier in this chapter. It's generally a good idea to leave enough extra stock so that you can sand the resawn pieces smooth.

Continue to Pad Sawing
Back to Round Stock

Subscribe | Illustrated Tips | Unsubscribe | Change of Address | Invite A Friend | Downloading Help | Daily Tips Archive | Links

Policies | Contact Us | Corporate Web Site

© 2008 Shopsmith Inc. All rights reserved.