|
Tip
#38
Molding
(continued)
Printer
friendly version of Tip -Pg.
1-2, Pg. 3-4,
Pg. 5-6,
Pg. 7
(PDF)
Help with Downloading
PDF Files
Molding
Safety
Warning:
Before using the molder head accessory, read and understand
these important safety instructions:
Danger
Zone--The danger zone extends 3" out from the knives on
all sides, 2'in back of the knives, and 8' in front of the
knives. The reason for the extended danger zone in front and
back of the knives is because of the danger of kickback.
- Read
and understand your Table Saw Safety.
- When
the molder head accessory is used, it is necessary to remove
the upper saw guard. Whenever the upper saw guard is removed,
keep the lower saw guard in place and work with extreme
caution.
- Never
use the molder head accessory without the molder insert
installed. After installing the molder insert, turn the
upper auxiliary spindle by hand to be sure the knives clear
the insert.
- Make
sure the setscrew In the molder/dado arbor is tightened
against the flat of the main spindle, the tongue washer
is installed next to the hex nut, the threaded shaft of
the arbor is flush with or extends past the end of the hex
nut, and the hex nut is securely tightened.
Continue
to Molder Knives
Back to Intro
|
